Raspberry Pi A/B 26 and 40 pin connector

Install dcm4chee-cdw on raspberry pi 2 (or raspberry pi model b) part 2 - writing dicom to flashdrive

Replace path to mkisofs and cdrecord to own scripts.
Connect button and LED to gpio connector. (button -  pins 9/11, led - pins 13/14)

Scripts will be availiable later.

Install dcm4chee-cdw on raspberry pi 2 (or raspberry pi model b)

1. Download minimal Raspberry Pi image from https://downloads.raspberrypi.org/raspbian_lite_latest,
write it on SD-card,
on any Linux  - apply gparted to /dev/sdb, resize partition up to flash size.

2. Load system on Raspberry. Connect by ssh.